Condensing the laser light with a high performance lens system achieves sharp cuts with less thermal influence.
Direct linkage of a CAD system to the laser control computer achieves easy working of complex shapes.
| Item | LAY-753B | Remark | |
|---|---|---|---|
| Laser | High luminance YAG laser | LAY-807A | |
| Max. rated output | 15W (Lower order mode) | Average value | |
| Max. rated output energy | - | ||
| Pulse width | 0.02 to 2.0ms | 0.01ms step | |
| Pulse repetition frequency | 1 to 500pps | ||
| Pulse peak power | 6kw | Maximum value | |
| Table | Effective stroke | 500 × 450mm | |
| Repetitive positioning accuracy | ±2µm | ||
| Software | CAM | CAD data: DXF format | Cover format, IGES format (option) |
| Power requirement | Voltage | AC200V±10% | |
| Current | Max. 175A | ||
| Cooling water | Water temperature | 5 to 32°C | |
| Flow rate | Max. 55L/min | ||
| Assist gas | O2, N2 etc. | Depending on the material to work | |
| Equipment dimensions | Working stage | 2270 (W) ×1750 (D) ×2040(H) mm | |
| Power supply | 566 (W) ×800 (D) ×2081(H) mm | ||
| Cooling unit | 550 (W) ×808 (D) ×1440 (H) mm | ||
